FC 1.1.1 fixes: AttachmentSupport via PropertiesList, import Sketcher, Midplane fallback

_patch_fix.py

@@ -0,0 +1,20 @@
+with open("src/freecad_mcp/tools/partdesign.py", "r") as f:
+    c = f.read()
+
+# Revolution fix
+old1 = "rev.Symmetric = {symmetric}\nrev.Reversed = {reversed}"
+new1 = "# FC 1.1.1: use Midplane instead of Symmetric\nif \"Midplane\" in rev.PropertiesList:\n    rev.Midplane = {symmetric}\nelif \"Symmetric\" in rev.PropertiesList:\n    rev.Symmetric = {symmetric}\nrev.Reversed = {reversed}"
+
+c = c.replace(old1, new1)
+print(f"Revolution: {'fixed' if old1 in c else 'may have issues'}")
+
+# Groove fix
+old2 = "groove.Symmetric = {symmetric}\ngroove.Reversed = {reversed}"
+new2 = "# FC 1.1.1: use Midplane instead of Symmetric\nif \"Midplane\" in groove.PropertiesList:\n    groove.Midplane = {symmetric}\nelif \"Symmetric\" in groove.PropertiesList:\n    groove.Symmetric = {symmetric}\ngroove.Reversed = {reversed}"
+
+c = c.replace(old2, new2)
+print(f"Groove: {'fixed' if old2 in c else 'may have issues'}")
+
+with open("src/freecad_mcp/tools/partdesign.py", "w") as f:
+    f.write(c)
+print("Done")

src/freecad_mcp/tools/partdesign.py

@@ -95,11 +95,17 @@ if {body_name!r}:
     # Set support plane
     plane = {plane!r}
     if plane in ["XY_Plane", "XZ_Plane", "YZ_Plane"]:
-        sketch.Support = (body.Origin.getObject(plane), [""])
+        # FC 1.1.1: use PropertiesList check (hasattr unreliable for C++ properties)
+        if "AttachmentSupport" in sketch.PropertiesList:
+            sketch.AttachmentSupport = (body.Origin.getObject(plane), [""])
+        else:
+            sketch.Support = (body.Origin.getObject(plane), [""])
         sketch.MapMode = "FlatFace"
     elif plane.startswith("Face"):
-        # Attach to face
+        if "AttachmentSupport" in sketch.PropertiesList:
-        sketch.Support = (body, [plane])
+            sketch.AttachmentSupport = (body, [plane])
+        else:
+            sketch.Support = (body, [plane])
         sketch.MapMode = "FlatFace"
 else:
     # Standalone sketch
@@ -161,6 +167,7 @@ if sketch is None:
 
 # Add rectangle
 import Part
+import Sketcher
 
 x, y, w, h = {x}, {y}, {width}, {height}
 
@@ -282,7 +289,11 @@ pad_name = {name!r} or "Pad"
 pad = body.newObject("PartDesign::Pad", pad_name)
 pad.Profile = sketch
 pad.Length = {length}
-pad.Symmetric = {symmetric}
+# FC 1.1.1: use Midplane instead of Symmetric
+if "Midplane" in pad.PropertiesList:
+    pad.Midplane = {symmetric}
+elif "Symmetric" in pad.PropertiesList:
+    pad.Symmetric = {symmetric}
 pad.Reversed = {reversed}
 
 doc.recompute()
@@ -554,7 +565,11 @@ rev_name = {name!r} or "Revolution"
 rev = body.newObject("PartDesign::Revolution", rev_name)
 rev.Profile = sketch
 rev.Angle = {angle}
-rev.Symmetric = {symmetric}
+# FC 1.1.1: use Midplane instead of Symmetric
+if "Midplane" in rev.PropertiesList:
+    rev.Midplane = {symmetric}
+elif "Symmetric" in rev.PropertiesList:
+    rev.Symmetric = {symmetric}
 rev.Reversed = {reversed}
 
 # Set axis reference
@@ -638,7 +653,11 @@ groove_name = {name!r} or "Groove"
 groove = body.newObject("PartDesign::Groove", groove_name)
 groove.Profile = sketch
 groove.Angle = {angle}
-groove.Symmetric = {symmetric}
+# FC 1.1.1: use Midplane instead of Symmetric
+if "Midplane" in groove.PropertiesList:
+    groove.Midplane = {symmetric}
+elif "Symmetric" in groove.PropertiesList:
+    groove.Symmetric = {symmetric}
 groove.Reversed = {reversed}
 
 # Set axis reference