SideType replaces Midplane/Symmetric for FC 1.1.1 compatibility

_patch_fix.py

@@ -0,0 +1,24 @@
+with open("src/freecad_mcp/tools/partdesign.py", "r") as f:
+    c = f.read()
+
+# Fix pad_sketch: Midplane -> SideType
+old = '# FC 1.1.1: use Midplane instead of Symmetric\nif "Midplane" in pad.PropertiesList:\n    pad.Midplane = {symmetric}\nelif "Symmetric" in pad.PropertiesList:\n    pad.Symmetric = {symmetric}'
+new = '# FC 1.1.1: SideType replaces Midplane/Symmetric\nif "SideType" in pad.PropertiesList:\n    pad.SideType = "Symmetric" if {symmetric} else "One side"\nelif "Midplane" in pad.PropertiesList:\n    pad.Midplane = {symmetric}\nelif "Symmetric" in pad.PropertiesList:\n    pad.Symmetric = {symmetric}'
+c = c.replace(old, new)
+print("Pad: SideType applied" if old not in c else "Pad NOT found")
+
+# Fix revolution_sketch
+old2 = '# FC 1.1.1: use Midplane instead of Symmetric\nif "Midplane" in rev.PropertiesList:\n    rev.Midplane = {symmetric}\nelif "Symmetric" in rev.PropertiesList:\n    rev.Symmetric = {symmetric}'
+new2 = '# FC 1.1.1: SideType replaces Midplane/Symmetric\nif "SideType" in rev.PropertiesList:\n    rev.SideType = "Symmetric" if {symmetric} else "One side"\nelif "Midplane" in rev.PropertiesList:\n    rev.Midplane = {symmetric}\nelif "Symmetric" in rev.PropertiesList:\n    rev.Symmetric = {symmetric}'
+c = c.replace(old2, new2)
+print("Rev: SideType applied" if old2 not in c else "Rev NOT found")
+
+# Fix groove_sketch
+old3 = '# FC 1.1.1: use Midplane instead of Symmetric\nif "Midplane" in groove.PropertiesList:\n    groove.Midplane = {symmetric}\nelif "Symmetric" in groove.PropertiesList:\n    groove.Symmetric = {symmetric}'
+new3 = '# FC 1.1.1: SideType replaces Midplane/Symmetric\nif "SideType" in groove.PropertiesList:\n    groove.SideType = "Symmetric" if {symmetric} else "One side"\nelif "Midplane" in groove.PropertiesList:\n    groove.Midplane = {symmetric}\nelif "Symmetric" in groove.PropertiesList:\n    groove.Symmetric = {symmetric}'
+c = c.replace(old3, new3)
+print("Groove: SideType applied" if old3 not in c else "Groove NOT found")
+
+with open("src/freecad_mcp/tools/partdesign.py", "w") as f:
+    f.write(c)
+print("Done")

src/freecad_mcp/tools/partdesign.py

@@ -289,8 +289,10 @@ pad_name = {name!r} or "Pad"
 pad = body.newObject("PartDesign::Pad", pad_name)
 pad.Profile = sketch
 pad.Length = {length}
-# FC 1.1.1: use Midplane instead of Symmetric
+# FC 1.1.1: SideType replaces Midplane/Symmetric
-if "Midplane" in pad.PropertiesList:
+if "SideType" in pad.PropertiesList:
+    pad.SideType = "Symmetric" if {symmetric} else "One side"
+elif "Midplane" in pad.PropertiesList:
     pad.Midplane = {symmetric}
 elif "Symmetric" in pad.PropertiesList:
     pad.Symmetric = {symmetric}
@@ -565,8 +567,10 @@ rev_name = {name!r} or "Revolution"
 rev = body.newObject("PartDesign::Revolution", rev_name)
 rev.Profile = sketch
 rev.Angle = {angle}
-# FC 1.1.1: use Midplane instead of Symmetric
+# FC 1.1.1: SideType replaces Midplane/Symmetric
-if "Midplane" in rev.PropertiesList:
+if "SideType" in rev.PropertiesList:
+    rev.SideType = "Symmetric" if {symmetric} else "One side"
+elif "Midplane" in rev.PropertiesList:
     rev.Midplane = {symmetric}
 elif "Symmetric" in rev.PropertiesList:
     rev.Symmetric = {symmetric}
@@ -653,8 +657,10 @@ groove_name = {name!r} or "Groove"
 groove = body.newObject("PartDesign::Groove", groove_name)
 groove.Profile = sketch
 groove.Angle = {angle}
-# FC 1.1.1: use Midplane instead of Symmetric
+# FC 1.1.1: SideType replaces Midplane/Symmetric
-if "Midplane" in groove.PropertiesList:
+if "SideType" in groove.PropertiesList:
+    groove.SideType = "Symmetric" if {symmetric} else "One side"
+elif "Midplane" in groove.PropertiesList:
     groove.Midplane = {symmetric}
 elif "Symmetric" in groove.PropertiesList:
     groove.Symmetric = {symmetric}